Sharp DX-C200P ユーザーズマニュアル
Message
Explanation
Recommended Action
TypeMsmtch: # Start/JobReset
The paper type setting in the
tray # (1, 2, bypass) differs
from that of actual paper type in
the tray.
tray # (1, 2, bypass) differs
from that of actual paper type in
the tray.
Load paper of the selected type
in the tray, and then press the
[Stop/Start] key to continue
printing.
Press the [Job Reset] key to
cancel printing.
in the tray, and then press the
[Stop/Start] key to continue
printing.
Press the [Job Reset] key to
cancel printing.
Cover Open
The top or front cover is open.
Open and then close the top or
front cover.
front cover.
Controller FW download failed
Controller FW could not be
downloaded.
downloaded.
Turn off the main power, turn it
back on, and then download
the controller FW again.
If the download fails again,
contact your sales or service
representative.
back on, and then download
the controller FW again.
If the download fails again,
contact your sales or service
representative.
Incorrect Toner: #
Irregular toner # (Black,
Magenta, Cyan or Yellow) is
set.
Magenta, Cyan or Yellow) is
set.
Replace the toner to
appropriate one.
appropriate one.
Load Paper #
The indicated tray # (1, 2,
bypass) is out of paper.
bypass) is out of paper.
Memory Overflow
This error occurs when FW
memory is not enough to save
the printing page.
memory is not enough to save
the printing page.
Reduce the size of the data, and
then try the operation again.
then try the operation again.
8. Troubleshooting
118