Sharp DX-C200P ユーザーズマニュアル

Carefully push Tray 1 straight into the printer.

CER035

To avoid paper jams, make sure the tray is securely inserted.

• The upper limit differs depending on paper type; thin paper or thick paper. Check the label inside

the tray to confirm the upper limit.

• The remaining paper indicator on the right front side of the paper tray shows approximately how

much paper is remaining.

• For details about paper types supported by the printer, see p.55 "Paper Recommendations".
• For details about the paper settings, see Software Guide.

Loading paper longer than A4

This section explains how to load paper longer than A4 (297 mm) into the printer.

• Make sure paper is not stacked above the limit mark inside the tray. Misfeeds might occur.
• After loading paper in the tray, specify the paper type and size using the control panel to avoid

printing problems. This machine does not detect the paper size automatically.

• Do not mix different types of paper in the same paper tray.
• Do not move the side paper guides forcefully. Doing so can damage the tray.
• Do not move the end paper guide forcefully. Doing so can damage the tray.
• When inserting the tray, make sure it is not slanted. Inserting it at a slant can damage the printer.

Loading Paper