Sharp ML-4550 ユーザーズマニュアル

ページ / 112
9.1   
<Troubleshooting>
9
 Troubleshooting
This chapter provides helpful information for what to do if you encounter 
an error while using your printer. 
This chapter includes:
Clearing paper jams
When a paper jam occurs, the Status LED lights red. Open and close 
the top cover. The jammed paper automatically exits the printer. 
If the paper does not exit, check the display on the control panel. The 
message indicating the corresponding location of the paper jam 
appears. Refer to the table below to locate the paper jam and to clear it: 
Note
• When removing paper that is jammed in the printer, if possible 
always pull the paper in the direction that it normally moves so 
as not to damage internal components. Always pull firmly and 
evenly; do not jerk the paper. If the paper tears, ensure that all 
fragments of paper are removed; otherwise a jam will occur 
again.
Message
Location of Jam
Go To
Paper Jam 0
Open/Close Door
In the paper feed area
(tray 1, optional tray 2, 
optional tray 3, optional tray 4, 
multi-purpose tray)
the next 
column
Paper Jam 1
Open/Close Door
Around the toner cartridge
page 9.3
Paper Jam 2
Check Inside
In the paper exit area
page 9.4
Paper Exit Jam 1
Open/Close Door
Between the toner cartridge 
and the paper exit area
page 9.3
Paper Tray 2 Jam
Open Tray 2
In the optional tray 2
page 9.2
Paper Tray 3 Jam
Open Tray 3
In the optional tray 3
page 9.2
Paper Tray 4 Jam
Open Tray 4
In the optional tray 4
page 9.2
Duplex Jam 0
a
 
Check Inside
a. Available with the optional duplex unit in the ML-4550 and ML-4551N.
In the duplex area
page 9.4
Duplex Jam 1
Open/Close Door
In the duplex area
page 9.5