Sharp MX-7040N ユーザーズマニュアル

The machine has two power switches: The main power switch inside the front cover located in the lower left corner, and the [POWER] button (   ) on the operation panel.

•  Please note that the Bypass-tray is standard feature in some countries and 

regions.

•  When using the fax or Internet fax function, always keep the main power switch in 

the "On" position.

•  In some machine operating states, restarting using the [POWER] button ( ) may 

not make the settings take effect. In this case, turn off the main power switch and 
then turn it on again.

•  Turn the main power switch to the "   " position.

The main power indicator blinks in green. The [POWER] button 

( ) does not function while the main power indicator blinks in 

green.

•  After the main power indicator lights up green, press the 

[POWER] button ( ).

Turn off the power by pressing the [POWER] button ( ), then turn the 

main power switch to the "   " position.

In order for some settings to take effect, the machine must be restarted. 
Follow the message displayed on the touch panel to restart the system 
(turn off the power by pressing the [POWER] button ( ) and then press it 

again to turn the power back on).

•  When turning off the main power switch, make sure that all indicators other than the 

main power are turned off.

•  In the case of a sudden main power outage, turn the power for the machine back on 

and then turn it off in the correct order. If you turn off the main power switch or unplug 
the power cord while the indicator is lit up or blinking, the hard disk drive may be 
damaged or data may be lost.

•  Turn off both the [POWER] button ( ) and the main power switch and unplug the 

power cord if you suspect a machine failure, if there is a bad thunderstorm nearby, or 
when you are moving the machine.