Sharp MX-7500N ユーザーズマニュアル
33
ADMINISTRATOR
Forwarding all sent data to the administrator (document administration function)
Setting mode password
This function is used to forward all data sent by the machine to a specified destination
(Scan to E-mail address, Scan to FTP destination, or Scan to Network Folder
destination). This function can be used by the administrator of the machine to archive
all sent data. To configure the document administration settings, click [Application
Settings] and then [Document Administration Function] in "Settings mode".
(Administrator rights are required.)
The forwarding data, exposure, and resolution settings of sent data remain
in effect.
Account
Password
User
user
users
Administrator
admin
admin
System administrator
sysadmin
sysadmin
Do not forget the new administrator password.
An administrator password is required to configure the machine settings using
administrator rights.
The settings can be configured from either the operation panel or by using a computer
web browser.
After setting up the machine, refer to "Settings mode" in the User’s Manual to set a
new password.
The same administrator password is used for the operation panel and the
Web page. If the administrator changes a password on the operation panel,
the password will be valid when logging in to the Web page.
Password for logging in from a computer
As factory default, "Administrator" is the only account allowed to log in from a Web
browser. By setting user authentication, "System Administrator" will also be allowed to
log in from the Web browser. You can also specify a device account as a login user.
The factory default passwords for respective accounts are shown in the following.
Logging in as an "Administrator" or "System Administrator" allows you to manage all
the settings available via Web browser.