Sharp AL-2050CS ユーザーズマニュアル
14
INSTALLING THE TD (TONER/DEVELOPER) CARTRIDGE
1
Open the bypass tray, and
then open the side cover.
then open the side cover.
2
Remove the CAUTION tape from the front cover and remove the
two protective pins from the fusing machine by pulling the
strings upward one at a time.
two protective pins from the fusing machine by pulling the
strings upward one at a time.
3
Press gently on both sides of
the front cover to open the
cover.
the front cover to open the
cover.
4
Remove the TD (Toner/Developer) cartridge from the bag. Remove
the protective paper. Hold the cartridge on both sides and shake it
horizontally four or five times. Hold the tab of the protective cover
and pull the tab to your side to remove the cover.
the protective paper. Hold the cartridge on both sides and shake it
horizontally four or five times. Hold the tab of the protective cover
and pull the tab to your side to remove the cover.
CAUTION tape
Protective pins
4 or 5 times
!AL-2050CS.book 14 ページ ２００８年１月７日 月曜日 午後８時１０分