Sharp AJ2000 ユーザーズマニュアル

50

If a document is printed skewed or partly off the paper, follow the steps listed below.

Select "Page Setup" from the "File" menu of your 
application to ensure that the paper size selected for the 
"Paper Size" setting is the same to the size of the loaded 
paper. If the "Fit To Page" setting is activated, make 
sure that the value for "Output Paper" of the "Paper" 
menu is the same to the size of the loaded paper size.

Select the "Page Setup" from the "File" menu of your 
application to make sure that the desired orientation is 
selected for the "Orientation" setting.

If a document is physically damaged as it is output or 
the image is skewed on the paper discard the jammed 
sheet, reinsert the paper supply and print again. Insert 
the paper so that there is no visible space between the 
paper and the paper guides.

Reference:

See "LOADING PAPER" in the Setup Guide 
and Operation Manual for more details on 
inserting paper.

Check the layout of the document margins and the 
paper size settings for the application you are using. 
Also check if the print settings are specified correctly 
to suit the paper size.

Reference: