Sharp AR-M230 ユーザーズマニュアル
4
PRINTING FROM MACINTOSH
31
Basic printing
(part 1)
To use the machine as a printer for the Macintosh, the print server card (AR-NC5J) and the PS3 expansion kit must be installed and
the machine must be connected to a network. To install the PPD file and configure the printer driver settings, see the software setup
guide for network printer.
Before printing, make sure that the correct size of paper for your document has been loaded in the machine.
the machine must be connected to a network. To install the PPD file and configure the printer driver settings, see the software setup
guide for network printer.
Before printing, make sure that the correct size of paper for your document has been loaded in the machine.
1
Make sure that the ON LINE indicator on the
operation panel is lit.
operation panel is lit.
If the ON LINE indicator is not
on, press the [PRINT] key to
switch to printer mode and then
touch the [ONLINE] key.
on, press the [PRINT] key to
switch to printer mode and then
touch the [ONLINE] key.
The status of the printer function is indicated by the ON
LINE and DATA indicators next to the [PRINT] key.
LINE and DATA indicators next to the [PRINT] key.
2
Start the application and open the document
that you wish to print.
that you wish to print.
3
Select "Print" from the application's "File"
menu.
menu.
4
Make sure that the correct printer is selected.
ON LINE indicator
DATA indicator
Lit
The machine is online
and ready to print.
and ready to print.
There is print data in
memory that has not
been printed yet.
memory that has not
been printed yet.
Blinking
—
The machine is
printing.
printing.
Off
The machine is offline
and not ready to print.
and not ready to print.
The machine is not
printing.
printing.
COPY
PRINT
SCAN
ON LINE
DATA
DATA
DATA
●
The machine name that appears in the "Printer:" menu
is the name that was entered when AppleTalk settings
were configured from the CD-ROM for the print server
card. Unless the name was changed when configuring
the settings, it will be "SCxxxxxx" (where "xxxxxx" is a
sequence of characters that varies depending on your
machine).
is the name that was entered when AppleTalk settings
were configured from the CD-ROM for the print server
card. Unless the name was changed when configuring
the settings, it will be "SCxxxxxx" (where "xxxxxx" is a
sequence of characters that varies depending on your
machine).
●
The Print window varies depending on the operating
system version, the printer driver version, and the
application.
system version, the printer driver version, and the
application.
Note