Sharp AR-M230 ユーザーズマニュアル

■

■

■

■ Have the printer driver settings been specified to 

The printing resolution can be set to 1200 dpi, 600 dpi, or 300 
dpi. When 600 dpi or 300 dpi is selected, "SMOOTHING" can 
also be selected to improve the image quality.
Windows: Change the resolution settings in the "Advanced" 

tab of the printer driver setup screen.

Macintosh: Change the resolution settings in the "Advanced" 

menu in the Print window. (In Mac OS X v10.1 to 
10.1.5, change the resolution settings in the 
"Advanced" tab of the "Printer Features" menu.)

■

■

■

■ Is the paper loaded correctly?

If a document is physically damaged when it is output or the 
image is skewed on the paper, discard the damaged sheet, 
reinsert the paper and print again. Insert the paper so that 
there is no visible space between the paper and the paper 
guides.

☞

See the operation manual for copier for more details on 
inserting paper.

■

■

■

■ Did you set sufficient margins in the paper settings 

Printing is not possible at the edges of the paper. The print 
margins are 5/32" (4 mm) at the top and bottom of the paper 
and 1/8" (3 mm) at the sides of the paper. When configuring the 
paper settings in the software application, be sure to establish 
margins that are at least as large as the print margins.

■

■

■

■ Does the paper size set for the print image match the 

Make sure that the paper size setting matches the size of 
paper loaded in the machine. When "Auto Select" is selected 
for the paper source in the print settings, the print method will 
vary depending on the settings of the key operator programs.

☞

Windows: 

☞

Macintosh: 

■

■

■

■ Are the print orientation settings correct?

Make sure that the correct paper orientation is selected for 
the print image in the application's paper settings and in the 
print settings.
If the paper is loaded in the machine in a different orientation 
from the print image, the image is normally automatically 
rotated to match the paper; however, if this function has been 
disabled in the key operator programs, the paper orientation 
must be set in the application. (See "ROTATED PRINT" in 
the key operator's guide.)

●

A slower printing speed may result when 1200 dpi or 
"SMOOTHING" is selected.

●

For the available resolution settings, see "