Olympus P-10 ユーザーズマニュアル
22
Printing images from digital camera
Preparation
Printing
For Your Information
Introduction
ENGLISH
4
Pull the paper stopper on the top of the printer down toward the
front.
front.
1
Control print operations using the digital camera.
After printing begins, the ACCESS indicator on the printer will blink.
When printing is finished, the indicator turns off.
When printing is finished, the indicator turns off.
See the digital camera operations manual for details on digital
camera operations.
camera operations.
2
After printing is complete, turn off the digital camera and printer
before removing the USB cable.
before removing the USB cable.
Caution
Never open the cartridge door or paper tray door during printing.
Do not move the printer during printing.
Do not turn off printer or digital camera, or remove the AC adapter during
printing. In the event that power is interrupted or the AC adapter removed,
restore power and perform the interrupted operations again. Leaving the
printer unplugged in printing mode may cause it to malfunction.
printing. In the event that power is interrupted or the AC adapter removed,
restore power and perform the interrupted operations again. Leaving the
printer unplugged in printing mode may cause it to malfunction.
Using the digital camera to control the print
operation
operation
GO
SELECt
Sample Digital Camera display
p10_e_000_bookfile.book Page 22 Monday, December 15, 2003 11:51 AM