Mitsubishi Electronics CPK60DWS ユーザーズマニュアル
6
UNPACKING
UNPACKING
Take the printer out of the box by the following procedures. Make sure to check the accessories.
CONTENTS
The accessories items are placed in the top cushion. Check all items are included.
Quick setup
guide
Paper strip bin
CD-ROM
Paper flanges
Spacers
Power cord
Ink cassette
Make sure to remove the protective materials from the ink cassette and paper flanges.
Open the printer box from the top and remove
the top cushion containing the accessories out
of the box.
Remove the protective cardboard and then take the accessories
out of the cushion.
Carefully pull the printer up and out of the box.
Pull the printer straight up as shown in the figure.
NOTE
Printer weighs about 12 kg. Handle it with care.
Unwrap the packing.
Remove the protective materials for transportation such as
protective sheet.
Remove the paper strip bin before carrying the printer.
Hold the printer by the front and rear handle as illustrated in the
drawing.
CAUTION
• Do not carry the printer with the paper strip bin attached and
by holding the part under the paper strip bin. The paper strip
bin may be removed and fall. It may cause injury or damage.
• When the printing unit is not closed firmly or you press the
OPEN button accidentally, the printing unit may open. It can
cause injury or damage.
Cable ties
Securing band
Screws, Washer
These are contained in the printing unit.
Protective
cardboard
Accessories