Nikon MPS1-2 ユーザーズマニュアル
Updating Software
D - 6
D.4.2 NetWare
The MPS.SYS Þle should be placed in the login directory on the NetWare Þle server. The
Server cannot actually log into the Þle server (since it knows no username/password); it
can only access Þles in the login directory itself. On the Server, specify the Þle server
name, Þlename, and path.
Server cannot actually log into the Þle server (since it knows no username/password); it
can only access Þles in the login directory itself. On the Server, specify the Þle server
name, Þlename, and path.
D.4.3 TCP/IP
Before the Server downloads the new software, it will send DHCP, BOOTP, and/or
RARP queries (BOOTP and RARP queries are enabled by default). Next, the Server will
attempt to download the MPS.SYS Þle using TFTP (Trivial File Transfer Protocol).
RARP queries (BOOTP and RARP queries are enabled by default). Next, the Server will
attempt to download the MPS.SYS Þle using TFTP (Trivial File Transfer Protocol).
If a host provides DHCP, BOOTP, or RARP support, it can be used to set the Server's IP
address (all) and loadhost information (BOOTP and RARP only). Add the Server's name,
address (all) and loadhost information (BOOTP and RARP only). Add the Server's name,
Local> SET PRIVILEGED
Password> SYSTEM (not echoed)
Local>> DEFINE SERVER NETWARE LOADHOST fileserver
Local>> DEFINE SERVER SOFTWARE SYS:\LOGIN\ MPS.SYS
Local>> INITIALIZE RELOAD
Password> SYSTEM (not echoed)
Local>> DEFINE SERVER NETWARE LOADHOST fileserver
Local>> DEFINE SERVER SOFTWARE SYS:\LOGIN\ MPS.SYS
Local>> INITIALIZE RELOAD