Netgear FWG114P v2 ユーザーズマニュアル

Connecting the FWG114P v2 to the Internet

3-13

If the Setup Wizard determines that your Internet service account uses Dynamic IP assignment, 
you will be directed to the menu shown in 

 below: 

1.

Enter your Account Name (may also be called Host Name) and Domain Name. These 
parameters may be necessary to access your ISP’s services, such as mail or news servers. If 
you leave the Domain Name field blank, the firewall will attempt to learn the domain 
automatically from the ISP. If this is not successful, you may need to enter it manually.

2.

If you know that your ISP does not automatically transmit DNS addresses to the firewall 
during login, select “Use these DNS servers” and enter the IP address of your ISP’s Primary 
DNS Server. If a Secondary DNS Server address is available, enter it also.

Note:  DNS servers are required to perform the function of translating an Internet name, such 
as www.netgear.com to a numeric IP address. For a fixed IP address configuration, you must 
obtain DNS server addresses from your ISP and enter them manually here. You should reboot 
your PCs after configuring the firewall for these settings to take effect.

3.

The Router’s MAC Address is the Ethernet MAC address that will be used by the firewall on 
the Internet port.