HP (Hewlett-Packard) T1200 ユーザーズマニュアル
Turn the automatic cutter on and off
To turn the printer's paper cutter on or off:
●
From the HP Utility for Windows, select the Settings tab and change the Cutter option in
Printer Settings > Advanced.
Printer Settings > Advanced.
●
From the HP Utility for Mac OS, select Configuration > Printer Settings > Advanced and
change the Cutter option.
change the Cutter option.
●
From the Embedded Web Server, select the Setup tab, then Printer Settings > Advanced, and
change the Cutter option.
change the Cutter option.
●
From the front panel, select the Setup menu icon
, then Print retrieval > Enable cutter and
change the cutter option.
The default setting is On.
NOTE:
If the cutter is turned off, it will not cut the paper between jobs, but it will continue to cut the
paper on loading, unloading and switching between rolls.
TIP:
To cut roll paper while the automatic cutter is disabled, see
.
Feed and cut the paper
If you press the
Form feed and cut
key
on the front panel, the printer advances the paper and
makes a straight cut across the front edge. There are several possible reasons why you might want to
do this.
do this.
●
To trim the leading edge of the paper if it is damaged or not straight.
●
To feed and cut the paper when the automatic cutter has been disabled.
●
To cancel the waiting time and print the available pages immediagely, if the printer is waiting to
nest more pages (T1200 series only).
nest more pages (T1200 series only).
NOTE:
The printheads are serviced after each print, and the paper cannot be cut until the process
completes, so you may notice a delay.
CAUTION:
Remove the cut piece from the output tray. If strips or short prints are left in the output
tray the printer could jam.
NOTE:
Photo and coated paper requires careful handling, see
TIP:
.
ENWW
Turn the automatic cutter on and off
45
P
ape
r ha
ndl
ing