HP (Hewlett-Packard) 70 ユーザーズマニュアル
Get the Waveform on the Display
The Autoscale feature automatically scales the vertical sensitivity and the
horizontal time base of the oscilloscope to provide a display of the waveform.
This simplifies the setup of the oscilloscope and is very helpful when the
amplitude and period of a signal are unknown.
horizontal time base of the oscilloscope to provide a display of the waveform.
This simplifies the setup of the oscilloscope and is very helpful when the
amplitude and period of a signal are unknown.
1
Press the
Config
key.
2
Highlight the field in the top, left corner of the display and press the
Select
key. Highlight
Scope
in the pop-up menu, and press the
Select
key.
3
Highlight the
Autoscale
field and press the
Select
key. Highlight
Continue
in the pop-up menu, and press the
Select
key.
Getting the Waveform on the Display
Result
The training board clock signal is automatically scaled and is displayed in
channel C1.
channel C1.
This field initiates the
Autoscale feature.
Autoscale feature.
Training board
clock signal
clock signal
Channel designator
The analyzer is in scope
mode.
mode.
Using the Oscilloscope
Get the Waveform on the Display
7-5