Mitsubishi Electronics QD75MH2 ユーザーズマニュアル

 
 

 

2 - 4 

MELSEC-Q

 

2   SYSTEM CONFIGURATION 

 

2.2 Component list 

The positioning system using the QD75MH is configured of the following devices. 

 

No. Part 

name 

Type 

Remarks 

1 Positioning 

module 

QD75MH1 
QD75MH2 
QD75MH4 

     

QD75MH

Number of control axes

MH: SSCNET    model

 

2 

GX Configurator-
QP 

SW D5C-QD75P-
E 

Refer to GX Configurator-QP Operating Manual for details. 

3 Personal 

computer 

DOS/V personal 
computer 

(Prepared by user) 
Refer to GX Configurator-QP Operating Manual for details. 

4 RS-232 

cable 

QC30R2 

(Prepared by user) 
An RS-232 cable is needed for connecting the CPU module with a 
personal computer (DOS/V). 
For details, refer to GX Configurator-QP Operating Manual. 

5 USB 

cable 

– 

(Prepared by user) 
A USB cable is needed for connecting the CPU module with a personal 
computer (DOS/V). 
For details, refer to GX Configurator-QP Operating Manual. 

6  Servo amplifier 

– 

(Prepared by user) 

7 

Manual pulse 
generator 

– 

(Prepared by user) 
Recommended: MR-HDP01 (Mitsubishi Electric) 

8 

SSCNET  cable 

1 

(For connecting 
between the 
QD75MH and the 
servo amplifier) 

– 

(Prepared by user) 
Cables are needed to connect the QD75MH with the servo amplifier. 

9 

Cable  1 
(For connecting 
between the 
QD75MH and the 
external device) 

– 

(Prepared by user) 
Cables are needed to connect the QD75MH with the external device. 
(Prepare them referring to the manuals for the connected devices and 
information given in 3.4.2 of this manual.) 

1: The SSCNET  cable connecting the QD75MH and servo amplifier, external device connection connector has been 

prepared. Refer to the below table.