HP (Hewlett-Packard) 510 ユーザーズマニュアル

troubleshooting tips

58

hp digital copier series

hp digital 

copier fails to 

power on

did you check the electrical connection to the hp digital copier?

1

Make sure the power cord is firmly connected to both the HP Digital 

Copier and the power supply box. Plug the power cord into a 

grounded power outlet, surge protector, or power strip.

2

If you are using a power strip, make sure the power strip is on. Or try 

plugging the HP Digital Copier directly into the power outlet.

3

Test the power outlet to make sure it is working.

4

If you have plugged the HP Digital Copier into a switched outlet, 

make sure the switch is on.

Warning! If the HP Digital Copier still does not power on, there may be a 

mechanical failure. Unplug the HP Digital Copier from the power outlet and 

contact HP. See hp customer support on page 71.

did you press the On button too quickly?
The HP Digital Copier may not respond if you press the On button too 

quickly. Press the On button once slowly.

hp digital 

copier will not 

make copies

have your ink cartridges expired?
When ink cartridges expire, the unit stops operating and a front panel 

message lets you know which ink cartridge is expired. To protect against 

deteriorated print quality and damage to your HP Digital Copier, the HP 

Digital Copier monitors the age of the ink cartridges.

Warning! Do not remove the ink cartridges until replacement cartridges 

are available or attempt to replace a printhead at the same time you are 

replacing an ink cartridge. 

GwenRG.book  Page 58  Thursday, January 31, 2002  5:20 PM