HP (Hewlett-Packard) 300X ユーザーズマニュアル
EN
Troubleshooting the HP JetDirect Print Server 103
Understanding the Ethernet and
Token Ring Configuration Pages
(External Print Servers)
Token Ring Configuration Pages
(External Print Servers)
This section describes the Ethernet/802.3 and Token Ring/802.5
configuration page for HP JetDirect external print servers.
configuration page for HP JetDirect external print servers.
The networking section of each configuration page is divided into
sections. The item numbers in the following table correspond to the
callouts in Figures 6.6 through Figure 6.8. The table references
correspond to tables in Chapter 7.
sections. The item numbers in the following table correspond to the
callouts in Figures 6.6 through Figure 6.8. The table references
correspond to tables in Chapter 7.
Table 6.3
Ethernet and Token Ring Configuration Pages
(External Print Servers) (1 of 2)
(External Print Servers) (1 of 2)
Item
Description
Troubleshooting Information
1
Environment information
(Table 7.5)
(Table 7.5)
Firmware revision number, type of
network (Ethernet or Token Ring), LAN
hardware address, port selection type,
active ports (three-port print servers),
speed, and manufacturing identification
number.
network (Ethernet or Token Ring), LAN
hardware address, port selection type,
active ports (three-port print servers),
speed, and manufacturing identification
number.
2
Lists error conditions or Ready.
3
Network statistics
(Table 7.5)
(Table 7.5)
Packets received, framing errors,
transmit collisions, and other network
statistics.
transmit collisions, and other network
statistics.
4
Novell NetWare status
information (Table 7.1)
information (Table 7.1)
Novell NetWare frame types received.
May indicate if the print server is locking
onto the wrong frame type, that multiple
frames are using the same network
number, and more.
May indicate if the print server is locking
onto the wrong frame type, that multiple
frames are using the same network
number, and more.