HP (Hewlett-Packard) 300X ユーザーズマニュアル
144 Printing on Windows NT DLC/LLC Networks
EN
Installing the DLC Transport and
Driver Software
Driver Software
All software necessary to support the HP JetDirect print server is
included with the Windows NT operating system. Follow the steps
below to install the DLC Transport and Driver software for the
HP JetDirect print server.
included with the Windows NT operating system. Follow the steps
below to install the DLC Transport and Driver software for the
HP JetDirect print server.
Note
The HP Network Port software is installed
automatically with the DLC protocol.
automatically with the DLC protocol.
Windows NT 4.0
1. Log onto the network with Supervisor privileges at any user
workstation.
2. Run Windows NT.
3. Right-click on Network Neighborhood and then click
Properties. The Network window appears.
4. Click the Protocols tab and then click Add. The Select Network
Protocol box appears.
5. Select DLC Protocol and then click OK.
6. Follow the directions on the screen to complete the installation.
7. To verify that the DLC software is installed, right-click on
Network Neighborhood, click Properties, and then click the
Protocols tab. Make sure that DLC Protocol appears in the
Network Protocols window.
Protocols tab. Make sure that DLC Protocol appears in the
Network Protocols window.