IBM 1220 ユーザーズマニュアル
158
Print Area
Purpose:
To modify the logical and physical printable area.
Values:
Note: The Whole Page setting only affects pages printed using PCL 5 interpreter. This
setting has no effect on pages printed using the PCL XL or PostScript interpreters.
If you try to print any data in the non-printable area defined by Normal Print Area,
the printer will clip the image at the boundary defined by the Normal defined
printable area.
If you try to print any data in the non-printable area defined by Normal Print Area,
the printer will clip the image at the boundary defined by the Normal defined
printable area.
Print Timeout
Purpose:
To specify the amount of time (in seconds) the printer waits before printing the last page of a print job
that does not end with a command to print the page. The print timeout counter does not start until
that does not end with a command to print the page. The print timeout counter does not start until
Waiting
is displayed.
Values:
Printer Language
Purpose:
To establish the default printer language used to communicate data from the computer to the printer.
Values:
Note: Setting a printer language as the default does not prevent a software application
from sending print jobs that use the other language.
Normal*
Fit to Page
Whole Page
Disabled
The printer does not print the last page of a print job until one of the following occurs:
• The printer receives enough information to fill the page.
• The printer receives a Form Feed command.
• You select Print Buffer from the Job Menu.
• The printer receives a Form Feed command.
• You select Print Buffer from the Job Menu.
1...255 (90*)
The printer prints the last page after the specified time. (Your printer may not support
the entire range of values.)
the entire range of values.)
PCL Emulation
PCL emulation, compatible with Hewlett-Packard printers.
PS Emulation*
PostScript emulation, compatible with Adobe PostScript language.