Intellinet Network Solutions 509077 ユーザーズマニュアル

Below are several questions and situations that may arise during your installation 

or use of the 1-Port MFP USB Wireless Print Server, with accompanying answers 

and suggested solutions.

•  Check that the power adapter and the network cable are properly connected to

  the MFP server. 

•  Check that the lAN and Ready leds are on.

•  Check that the IP address of the MFP server is in the same network segment

  as your computer. NOTE: If you’re not sure of the IP address setting of the MFP 

  server, check the TCP/IP setting of the MFP server from Server Manager.
How is the Ip address of the mFp server changed?

•  If a dHCP server is installed, you can let the MFP server obtain an IP address

  from the dHCP server automatically.

  1. open Server Manager and select “TCP/IP” setting.

  2. Select “Auto IP” and click “Save.”

  . Reboot the MFP server.

•  If setting up the IP address manually:

  1. open Server Manager and then select “TCP/IP” setting.

  2. Select “Static IP” and enter the IP address and subnet mask that match your  

      computer. Click “Save.”

  . Reboot the MFP server.

  NOTE: Setting a static IP address for the MFP server is recommended since a

  dHCP assignment may dramatically change the IP address of the MFP server. 
a user stays connected to the mFp server.

•  Contact the current user and request that he disconnect the device.

•  If the user forgets to disconnect the device, you can ask the administrator to

  release the device.

57

TROUBLESHOOTING