Zebra Technologies P1013372-001 REV. A ユーザーズマニュアル
ZXP Series Toolbox
Information
P1013372-001 Rev. A
Zebra ZXP Series 8 Card Printer with Laminator
85
Information
Printer
This information cannot be edited or changed by the user; however, this information may be
useful for Zebra trained and certified personnel in diagnosing or evaluating printer status.
useful for Zebra trained and certified personnel in diagnosing or evaluating printer status.
•
Firmware and Driver lists the versions of the Firmware (Firmware version, HCB, MAB,
Laminator, and Laminator MAB) and the version of the Driver.
Laminator, and Laminator MAB) and the version of the Driver.
•
Other shows the Interface, the Transfer type, and the Card type in use, RAM, Printer
serial no, and Laminator serial no.
serial no, and Laminator serial no.
•
Options shows the options installed -- Magnetic encoding, Contact smartcard, Contactless
smartcard, and Laminator type.
smartcard, and Laminator type.
•
Status displays Warnings, Faults, and Status; Input and Output speeds (single and
double); Top and Bottom transfer temperatures.
double); Top and Bottom transfer temperatures.
•
Network Configuration lists the IP address, Gateway, Subnet mask, and MAC address.
•
OCP shows the Language displayed in the Operator Control Panel and the LCD contrast
level selected.
level selected.
•
Odometer shows the number of Cards printed and the number of Printhead lines printed.