Zebra Technologies P330m ユーザーズマニュアル

22

P330i & P330m Card Printer User’s Manual

980459-001  Rev C

Connecting Power

The printer includes an internal AC power supply that accepts nominal input voltage in the 
range from 110 to 230 volts at 50 to 60 Hertz. The power source must be grounded.

Depending on specific model number, your printer will include one or two power cords; use 
the one that is appropriate for the AC power source connection at your location. If neither has 
an appropriate connector, AC power cords may be purchased locally; make sure it is a three-
wire (grounded) cord.

Place the Printer’s power switch in the OFF ( O ) position.

Depending on your local AC voltage, plug the appropriate power cord into the printer’s 
power connector and a grounded AC power source connection.

To turn the Printer on, set the Printer’s power switch to the ON ( | ) position.

Power 
Connector

Power 
Switch

Caution • If the power cord appears damaged in any way, or if the power cord will not 
securely plug into the Printer’s power connector or the AC power source connection, 

 Use of a damaged or incorrect power cord could cause equipment damage, 

result in an electrical fire, or possibly cause injury.