Zebra Technologies ZM400201101L0T ユーザーズマニュアル
Configuration
Print a Network Configuration Label
Print a Network Configuration Label
60
79695L-001 Rev. A
ZM400/ZM600 User Guide
3/27/07
Print a Network Configuration Label
If you are using a print server, you can print a network configuration label after the printer is
connected to the network.
connected to the network.
To print a network configuration label, complete these steps:
1.
On the control panel, press
SETUP/EXIT
.
2.
Press
PLUS (+)
or
MINUS (-)
to scroll through the parameters until you reach
LIST NETWORK
.
3.
Press
SELECT
to select the parameter.
4.
Press
PLUS (+)
to confirm printing.
A network configuration label prints (
). An asterisk designates whether the
wired or wireless print server is active. If no wireless print server is installed, the wireless
portion of the label does not print.
portion of the label does not print.
Figure 12 • Network Configuration Label (With a Wireless Print Server Installed)