Sony UP-51MDP ユーザーズマニュアル
125
Others
Specifications
Power requirements
UP-51MDP: 220 to 240 V AC,
50/60 Hz
UP-50/51MDU: 100 to 120 V AC,
50/60 Hz
UP-51MD: 100 to 120/220 to 240
V AC, 50/60 Hz
Power consumption
UP-51MDP: About 1.2 A max. at
25°C, 240 V AC
UP-50/51MDU: About 2.8 A max.
at 25°C, 120 V AC
UP-51MD: About 2.8 A max. at
25°C, 120 V AC
About 1.2 A max. at 25°C,
240 V AC
About 1.2 A max. at 25°C,
240 V AC
Operating temperature
5°C to 35°C (41°F to 95°F)
Operating humidity
20 % to 80 % (no condensation
allowed)
Storage and transport temperature
–20°C to 60°C (–4°F to 140°F)
Storage and transport humidity
20 % to 90 % (no condensation
allowed)
Dimensions
About 370
×
125
×
490 mm
(w/h/d)
(14
(14
5
⁄
8
×
5
×
19
3
⁄
8
inches)
Mass
About 14.5 kg (31 lb 15 oz)
Printing system
Sublimation heat transfer printing
Thermal head
11.6 dot/mm (2048 dots)
Total gradation
256 levels each for yellow,
magenta, and cyan
Printing time
Approximately 20 seconds (at
color printing at high speed)
color printing at high speed)
TV system
Selectable with the NTSC/PAL
selector (for UP-50/51MD/
51MDP)
In NTSC mode: NTSC/EIA
selector (for UP-50/51MD/
51MDP)
In NTSC mode: NTSC/EIA
standards
In PAL mode: PAL B.G.I
standards
Input connectors
RGB SYNC (analog RGB signal):
BNC connector
×
4
RGB: 0.7 Vp-p (75 ohm
termination switch set to ON)
SYNC: 0.3 to 4 Vp-p
SYNC ON G: Automatic
discrimination
75 ohms (75 ohm termination
switch set to ON), sync
negative
termination switch set to ON)
SYNC: 0.3 to 4 Vp-p
SYNC ON G: Automatic
discrimination
75 ohms (75 ohm termination
switch set to ON), sync
negative
S VIDEO (Separate luminance (Y)
and chrominance (C) signals):
4-pin mini-DIN
4-pin mini-DIN
×
1
Y: 1 Vp-p
C: For NTSC/EIA standards:
0.29 Vp-p color burst
For PAL B.G.I standards:
0.3 Vp-p color burst
75 ohms (terminated), sync
negative
C: For NTSC/EIA standards:
0.29 Vp-p color burst
For PAL B.G.I standards:
0.3 Vp-p color burst
75 ohms (terminated), sync
negative
VIDEO (NTSC composite video
signal for NTSC/EIA standards
and PAL composite video
signal for PAL B.G.I
standards): BNC connector
and PAL composite video
signal for PAL B.G.I
standards): BNC connector
×
1
1 Vp-p, 75 ohms (75 ohm
termination switch set to ON),
sync negative
termination switch set to ON),
sync negative
AC IN (for power input)
Output connectors
RGB SYNC (analog RGB signal):
BNC connector
×
4
RGB: 0.7 Vp-p (75 ohm
termination switch set to ON)
SYNC: 1 Vp-p
75 ohms (terminated), sync
negative
termination switch set to ON)
SYNC: 1 Vp-p
75 ohms (terminated), sync
negative
S VIDEO (Separate luminance (Y)
and chrominance (C) signals):
4-pin mini-DIN
4-pin mini-DIN
×
1
Y: 1 Vp-p
C: For NTSC/EIA standards:
0.29 Vp-p color burst
For PAL B.G.I standards:
0.3 Vp-p color burst
75 ohms (75 ohm termination
switch set to ON), sync
negative
C: For NTSC/EIA standards:
0.29 Vp-p color burst
For PAL B.G.I standards:
0.3 Vp-p color burst
75 ohms (75 ohm termination
switch set to ON), sync
negative