Zebra Technologies RW 420 ユーザーズマニュアル
21
RW Series User Guide
Loading Media From An External Supply
Note • Only the RW 420 supports an external media supply.
Refer to Figure 9. The RW 420 configured with the
External Media option has a loading slot in the rear of
the media compartment allowing you to use standard 4
in. (101.6 mm) wide fanfold media from an external sup-
ply. The external supply must be designed such that it
does not exert excessive drag as media is fed through the
printer, which could result in distorted printing.
the media compartment allowing you to use standard 4
in. (101.6 mm) wide fanfold media from an external sup-
ply. The external supply must be designed such that it
does not exert excessive drag as media is fed through the
printer, which could result in distorted printing.
Zebra offers a series of vehicle cradles for the RW 420
(P/Ns AK17463-003 and AK17463-004) which incorporate
provisions for installation of an external media supply bin.
provisions for installation of an external media supply bin.
• Pull the media supports apart, insert a Media Spacer
(Zebra part number BA16625-1) between them, and let
the media supports close. Insert the media from the ex-
ternal supply through the rear feed slot, between the me-
the media supports close. Insert the media from the ex-
ternal supply through the rear feed slot, between the me-
Figure 9: Loading Media from an External Supply
Media Spacer
p/n BA16625-1
p/n BA16625-1
Feed media through
bottom feed slot
Printing surface of
media must face the
printhead