Zebra Technologies 105SL ユーザーズマニュアル
18
105SL User Guide
6/4/2004 11342L Rev. 8
Printer Setup
Ribbon
Ribbon
Ribbon is a thin film that is coated on one side with wax or wax resin, which is transferred to
the media during the thermal transfer process. The media determines whether you need to use
ribbon and how wide the ribbon must be.
the media during the thermal transfer process. The media determines whether you need to use
ribbon and how wide the ribbon must be.
When to Use Ribbon
Thermal transfer media requires ribbon for printing while direct thermal media does not.
To determine if ribbon must be used with a particular media, perform a media scratch test.
To determine if ribbon must be used with a particular media, perform a media scratch test.
To perform a label scratch test, complete these steps:
1.
Scratch the print surface of the media with your fingernail.
2.
Did a black mark appear on the media?
Ribbon Width
When ribbon is used, it must be as wide as or wider than the media being used. If the ribbon is
narrower than the media, areas of the printhead are unprotected and subject to premature wear.
narrower than the media, areas of the printhead are unprotected and subject to premature wear.
Coated Side of Ribbon
Ribbon can be wound with the coated side on the inside or outside (see
Figure 14
). If you are
unsure which side of a particular roll of ribbon is coated, perform an adhesive test or a ribbon
scratch test to determine which side is coated.
scratch test to determine which side is coated.
Figure 14 • Ribbon Coated on Outside or Inside
If a black mark...
Then...
Does not appear on the media
The media is thermal transfer. A ribbon is
required with this type of media.
required with this type of media.
Appears on the media
The media is direct thermal. No ribbon is required
for this type of media, though ribbon may be used
to help protect the printhead from abrasion with the
media.
for this type of media, though ribbon may be used
to help protect the printhead from abrasion with the
media.
Outside
Inside