Zebra Technologies 79695L-002 ユーザーズマニュアル
RFID Operation
Additional Control Panel Parameters
Additional Control Panel Parameters
96
79695L-002 Rev. A
Z Series
®
/RZ™ Series User Guide
6/6/08
RFID Control Panel Parameters
display only if the printer has an RFID reader installed.
Table 14 • RFID Parameters (Page 1 of 4)
Parameter
Action/Explanation
Perform RFID Test
In the RFID test, the printer attempts to read and write to a transponder. In
the slow version, the printer first displays the hardware version, the reader
firmware version, and the program position. If the printer fails the test, the
control panel displays an error message. No label movement occurs with
this test.
In the RFID test, the printer attempts to read and write to a transponder. In
the slow version, the printer first displays the hardware version, the reader
firmware version, and the program position. If the printer fails the test, the
control panel displays an error message. No label movement occurs with
this test.
To perform the RFID test:
1.
Press
SELECT
to select the parameter.
2.
Position an RFID label with its transponder over the RFID antenna
(coupler) location (
(coupler) location (
1
).
3.
Press
MINUS (-)
to select
QUICK
.
OR
Press
Press
PLUS (+)
to select
SLOW
.
4.
If necessary, press
PLUS (+)
to select
CONTINUE
.
5.
Press
SELECT
to deselect the parameter.
RFID TEST
QUICK
QUICK
SLOW
1