Zebra Technologies LI 72 ユーザーズマニュアル

RW 420 User Guide

  Refer to Figure 7. The RW 420 configured with the Ex-

ternal Media option has a loading slot in the rear of the 
media compartment allowing you to use standard 4 in. 
(101.6 mm) wide fanfold media from an external supply.  
The external supply must be designed such that it does 
not exert excessive drag as media is fed through the 
printer, which could result in distorted printing.  

  Zebra offers a series of vehicle cradles for the RW 420 

(p/ns AK17463-003 and AK17463-004) which incorporate 
provisions for installation of an external media supply bin.

•  Pull the media supports apart, insert a Media Spacer  

(Zebra part number BA16625-1) between them, and let 
the media supports close.  Insert the media from the 
external supply through the rear feed slot, between the 
media guides and up through the media compartment as 
shown.  Make sure the side of the media you will be print-
ing on faces the printhead.

Figure 7: Loading Media from an External Supply