ASUS TS500-E5 ユーザーズマニュアル

5-22

Chapter 5: BIOS setup

The PCIPnP menu items allow you to change the advanced settings for PCI/PnP 

devices. The menu includes setting IRQ and DMA channel resources for either 

PCI/PnP or legacy ISA devices, and setting the memory size block for legacy ISA 

devices.

Take caution when changing the settings of the PCI/PnP Configuration menu 

items. Incorrect field values can cause the system to malfunction.

When set to [No], BIOS configures all the devices in the system. When set to 

[Yes] and if you install a Plug and Play operating system, the operating system 

configures the Plug and Play devices not required for boot. 

Configuration options: [No] [Yes]

Allows you to select the value in units of PCI clocks for the PCI device latency 

timer register. Configuration options: [32] [64] [96] [128] [160] [192] [224] [248]

When set to [Yes], BIOS assigns an IRQ to PCI VGA card if the card requests for 

an IRQ. When set to [No], BIOS does not assign an IRQ to the PCI VGA card even 

if requested. Configuration options: [Yes] [No]

When set to [Enabled], the pallete snooping feature informs the PCI devices that 

an ISA graphics device is installed in the system so that the latter can function 

correctly. Configuration options: [Disabled] [Enabled]

←→

↑↓