Lenovo 3395 ユーザーズマニュアル

ページ / 160
6. Flex the retaining clips as shown to remove the hard disk drive from the bracket.
Figure 39. Removing the hard disk drive from the bracket
7. To install a new hard disk drive into the bracket, flex the bracket and align pin
1
, pin
2
, pin
4
, and pin
5
on the bracket with the corresponding holes in the hard disk drive.
Important: Do not touch the circuit board
3
on the bottom of the hard disk drive.
8. Connect the signal cable and the power cable to the new hard disk drive.
Chapter 5
.
Installing or replacing hardware
55