Oceanic Veo 100Nx ユーザーズマニュアル

TO SET - FO2

Each time the unit is activated, FO2 will be automatically set for

a default value of AIR which can then be changed to values

between 21 and 50% in increments of 1%.

While the Surface Sequence is scrolling, depress the button

for 2 seconds.

Release the button when the FO2 screen appears with the

Set Point flashing (Fig. 18).

Press/release the button repeatedly to increase the FO2

value from 21 to 50% in increments of 1%, then display AIR

again.

For each FO2 value that appears, the display indicates the

Maximum Depth that can be achieved for a PO2 of 1.60

ATA (Fig. 19a), or the PO2 Alarm Set Point. If FO2 is set for

AIR, no Depth value will be displayed.

Depress the button for 2 seconds to accept the FO2 Set Point

displayed and advance to the Set Wet Activation screen.

Fig. 18 - FO2 set for AIR

Fig. 19 - FO2 set for 32%

(130 feet allowed)