Oceanic Veo 100Nx ユーザーズマニュアル

If you descend during the 10 minute Transition Period, time

underwater will be considered a continuation of that dive.  The

time at the surface (if less than 10 minutes) will not be added as

Elapsed Dive Time.

Once 10 minutes have elapsed, the Surface Mode icon and

Surface Interval time display colon stop flashing indicating that

the Dive and Transition Period are completed, and a subsequent

descent will be  considered a new dive.

For the remainder of the first 2 hours after surfacing, information

will continue to be displayed as the Surface Sequence, scrolling

through the Surface Mode >  Fly > Sat > Plan screens.  You will

also have full access to Log and Set modes.

The Time to Fly and Desat Timers begin counting down 10

minutes after surfacing from a dive (after the Transition Period).

The FLY countdown (Fig. 52) always begins at 23:50 (hr:min)

and the Desat countdown (Fig. 53) at 23:50 (maximum).

If a Violation occurred during the dive a single dash ( - ) will

appear instead of the letters FLY.  DeSat time will not be dis-

played.

Fig. 52 - TIME TO FLY

Fig. 53 - DESAT TIME