Oceanic Veo 100Nx ユーザーズマニュアル

If the graphic H2O appears during the Surface Mode (Fig. 60),

Fly Mode (Fig. 61), or Desaturation Mode, it is an indication that

the wet activation contacts are bridged (still wet) and the unit

must be rinsed in fresh water and thoroughly dried.

  The contacts are located in the button stem and back of the

case.

  Once the unit is dry, the graphic H2O will disappear from

the display.

  If the unit is not cleaned and dried prior to the countdowns

reaching 0:00 (hr:min), or making another dive, it will shut

off then automatically reactivate.

  The graphic H2O would then appear in place of Dive

Number when Surface Mode is displayed during the Surface

Sequence.

  If no dive is made after activation, the unit would shut off

after 2 hours, then automatically reactivate again if wet,

repeating the action until cleaned and dried.

Fig. 60 - SURFACE MODE

 (unit wet)

Fig. 61 - DESAT (unit wet)