Oceanic Veo 100Nx ユーザーズマニュアル

If the Module is in a Console, bend the rubber Console Boot back to expose the edge of

the Module.  If the Boot is flexible enough to permit, you may bend it back far enough to

scoop the Module out with your finger.  Otherwise, it may be necessary to insert a blunt

screwdriver until the tip rests just underneath the Module.  DO NOT pry the Module from

the Console!  Slowly increase the pressure under the Module by releasing the tension on

the rubber Boot.  The Module will slide up the screwdriver and exit the Console.

If the Module is in a Wrist Boot, it will be necessary to peel the lips of the Boot downward

off the Module while applying pressure from underneath, working it out slowly.

The Battery Compartment should only be opened in a dry and clean environment  with

extreme care taken to prevent the entrance of moisture or dust.

To prevent formation of moisture in the Battery Compartment, it is recommended that the

Battery be changed in an environment equivalent to the local outdoor temperature and

humidity (e.g., do not change the Battery in an air conditioned environment, then take it

outside during a hot sunny day).