Mitsubishi Electronics QSPCU ユーザーズマニュアル
9
EMC, LOW VOLTAGE, AND MACHINERY DIRECTIVES
9.1 Requirements for Conformance to EMC Directive
9.1.5 Others
9
- 8
9
EM
C AN
D
L
O
W
V
O
LT
AG
E
DI
RE
C
T
IV
E
S
10
LO
A
D
ING A
ND
INS
TA
LLA
T
ION
11
M
A
INT
E
NANCE
AND
IN
SP
ECT
IO
N
12
T
R
O
U
BL
ES
HO
O
T
IN
G
A
PPE
NDICES
INDEX
(2) Noise filter (power supply line filter)
A noise filter is a component which has an effect on conducted noise.
It is not required to fit the noise filter to the power supply line, but fitting it can further
suppress noise.
(The noise filter has the effect of reducing conducted noise of 10 MHz or less.)
It is not required to fit the noise filter to the power supply line, but fitting it can further
suppress noise.
(The noise filter has the effect of reducing conducted noise of 10 MHz or less.)
The precautions required when installing a noise filter are described below.
• Do not bundle the wires on the input side and output side of the noise filter. When
bundled, the output side noise will be induced into the input side wires from which
the noise was filtered.
the noise was filtered.
• Earth the noise filter earthing terminal to the control cabinet with the shortest wire
possible (approx. 10 cm (3.94 inch)).
Remark
(3) DC surge protective devices
DC surge protective device (SPD) is a device designed to protect electrical devices
from lightning surges on the DC power line. Connect a DC SPD to the module power
supply terminal of a CC-Link Safety remote I/O module. Use the one having
characteristics comparable to the MDP-D24 made by M-System Co., Ltd.
from lightning surges on the DC power line. Connect a DC SPD to the module power
supply terminal of a CC-Link Safety remote I/O module. Use the one having
characteristics comparable to the MDP-D24 made by M-System Co., Ltd.
Remark
• Before using a DC SPD, check the specifications and precautions in the manual.
• An MDP-D24 cannot be connected to the external power supply terminal of a
• An MDP-D24 cannot be connected to the external power supply terminal of a
CC-Link Safety remote I/O module.
Figure 9.11 Precautions on noise filter
Table9.3 Noise filer specifications
Noise Filter Model Name
FN343-3/01
FN660-6/06
ZHC2203-11
Manufacturer
SCHAFFNER
SCHAFFNER
TDK
Rated current
3A
6A
3A
Rated voltage
250V
Filter
Induction
Input side
(power supply side)
Output side
(device side)
Filter
Input side
(power supply side)
Output side
(device side)
The noise will be induced when the
input and output wires are bundled.
input and output wires are bundled.
Separate and lay the input
and output wires.
and output wires.