Brother 5250DN ユーザーズマニュアル

Appendix A

Local> SET IP SUBNET 255.255.255.0

If you do not have any subnets, use one of the following default subnet masks:

255.0.0.0 for class A networks

255.255.0.0 for class B networks

255.255.255.0 for class C networks

The leftmost group of digits in your IP address can identify the type of network you have. The value of this 
group ranges from 1 through 127 for Class A networks (e.g., 13.27.7.1), 128 through 191 for Class B networks 
(e.g.,128.10.1.30), and 192 through 255 for Class C networks (e.g., 192.168.1.4).

If you have a gateway (router), enter its address with the command 

SET IP ROUTER routeraddress, 

where 

routeraddress is the desired IP address of the gateway you wish to assign to the print server. For 

example:

Local> SET IP ROUTER 192.168.1.4

Type 

SET IP METHOD STATIC to set the method of IP access configuration to static.

To verify that you have entered the IP information correctly, type 

SHOW IP.

Type 

EXIT or CTR-D (i.e., hold down the control key and type "D") to end the remote console session.

The Web BRAdmin server software is designed to manage all LAN/WAN Brother network connected devices. 
By installing the Web BRAdmin server software on a computer running IIS*, Administrators with a web 
browser can connect to the Web BRAdmin server, which then communicates with the device itself. Unlike the 
BRAdmin Professional utility - which is designed for Windows

®

 systems only - the Web BRAdmin server 

software can be accessed from any client computer with a web browser that supports Java.

Please note this software is not included on the CD-ROM that was supplied with your Brother product. 

Please visit http://solutions.brother.com/webbradmin to learn more about this software and to download it.

IIS* = Internet Information Server 4.0, 5.0 or 5.1