Sharp MX-2010U ユーザーズマニュアル

Is the USB device compatible with the 
machine?

Is the connected USB device 
recognized correctly?

➞ System Settings > "USB-Device Check"

If it is not recognized, connect it once again.

Is the format of the USB memory 
FAT32?

Check the USB memory device format.
If the format of the USB memory is other than FAT32,  
use your computer to change the format to FAT32.

Are you using a USB memory with a 
capacity of more than 32 GB?

Does a message appear indicating that 
you need to remove paper from the 
stapler compiler?

Does the following message appear in 
the touch panel?
"Call for service. Code:xx-xx* Finisher 
trouble."
*Letters and numbers appear in xx-xx.

Check the plug of the connecting cable of the 
finisher.
Plug and unplug the cable and after ensuring that it has 
been properly plugged, restart the power supply to the 
machine.

Have functions been disabled by the 
administrator?

Check with your administrator.
Some functions may have been disabled in the system 
settings (administrator).

Does a message appear instructing you 
to check the staple unit?

☞

" (page 8-11)

Does a message appear instructing you 
to add staples?

Replace the staple cartridge.
Do not forget to replace the staple case.

☞

" (page 8-11)

Is a different width of paper mixed in?

To perform mixed size stapling, use paper of the 
same width and select the [Same Width] setting.
Stapling is not possible when paper of different widths 
are mixed together.
When copying, select [Same Width] from [Mixed Size 
Original] in the special modes.

Are there more sheets than can be 
stapled at once?

Is a paper size that cannot be stapled 
included in the print job?