Toshiba TECRA S1 ユーザーズマニュアル

ページ / 268
4  Replacement Procedures 
4.7 RTC Battery 
4-36 
TECRA S1 Maintenance Manual 
Removing the RTC Battery 
Remove the RTC battery according to the following procedures and Figure 4-21. 
1.  Disconnect the RTC battery cable from the RTC battery connector on the system 
board. 
2.  Take the RTC battery out of the battery tray. 
 
 
 
 
Figure 4-21  Removing the RTC battery 
 
Installing the RTC Battery 
Install the RTC battery according to the following procedures and Figure 4-21. 
1.  Connect the RTC battery cable to the RTC battery connector on the system board. 
2.  Place the RTC battery in the correct position.