DELL Workstation 470 and Workstation 670 ユーザーズマニュアル

26

Quick Reference Guide

www

.dell.com | support.dell.com

Running the Dell Diagnostics

It is recommended that you print these procedures before you begin.

1

Open the Dell Diagnostics on your hard drive or from the Drivers and Utilities CD.

From your hard drive:

a

Shut down and restart the computer.

b

When 

F2 = Setup

 appears in the upper-right corner of the screen, press 

<Ctrl><Alt><F10>.

If you wait too long and the Microsoft

®

 Windows

®

 logo appears, continue to wait until 

you see the Windows desktop. Then shut down your computer and try again. After the 
system boots to the Dell Diagnostics, go to step 2.

From the Drivers and Utilities CD:

a

Shut down and restart the computer.

b

When 

F2 = Setup

 appears in the upper-right corner of the screen, press <F12>.

If you wait too long and the Microsoft Windows logo appears, continue to wait until you 
see the Windows desktop. Then shut down your computer and try again.

 

NOTE: 

This feature changes the boot sequence for one time only. On the next start-up, the computer 

boots according to the devices specified in system setup.

The Boot Device Menu appears.

c

Insert the Drivers and Utilities CD.

d

Change the Boot Sequence to use the IDE CD-ROM device as the first device in the 
boot sequence.

The Dell Diagnostics Menu appears.

e

Select 

Dell 32-bit Diagnostics

 from the numbered list. If multiple versions are 

listed, select the version appropriate for your computer.

2

When the Dell Diagnostics main menu appears, select the type of test you want to perform.