DELL WorkStation 210 ユーザーズマニュアル

ページ / 234
D-2
Dell Precision 210 Desktop Systems User’s Guide
As a last resort, you can back up a hard-disk drive’s contents on diskettes, a method 
that is both time-consuming and prone to human error. Also, backing up a full 4-GB 
hard-disk drive requires approximately 277 diskettes (when using 1.44-MB diskettes), 
334 diskettes (when using 1.2-MB diskettes), or 139 diskettes (when using 2.88-MB 
diskettes). Therefore, if it is absolutely necessary to use diskettes as backup devices, 
any unwanted hard-disk drive files should be deleted before a backup procedure is 
started.
5HFRYHULQJ'DWD
Some hard-disk drive failures are recoverable. In these cases you may be able to 
recover all lost data if the proper utility software is available. Even losses such as acci-
dentally deleted files or accidental reformatting of a hard-disk drive can be reversed 
with these utilities.
If the system is running MS-DOS, many apparent data loss problems are due to cor-
ruption or erasure of the hard-disk drive’s master boot record (MBR), MS-DOS boot 
sector, or file allocation table (FAT); that is, accidental deletion of files or accidental 
reformatting of the hard-disk drive alters the MS-DOS boot sector, the FAT, and the 
root directory. 
However, such accidents do not actually erase the contents of the hard-disk drive files 
until new data is written to the sectors containing these files. With software such as 
the Norton Utilities, Mace Utilities, or PC-Tools Deluxe, the data stored in these areas 
can often be restored, meaning that you can recover most, if not all, of the data.
Unlike using the format command on a hard-disk drive, using format on a diskette 
completely erases all the data on the diskette unless you use the diskette format 
program included in the Mace Utilities.
For a complete description of data recovery procedures and the software needed to 
perform them, see 
The Paul Mace Guide to Data Recovery, published by Brady.
&OHDQLQJ6\VWHP&RPSRQHQWV
An exhaust fan in the power supply cools the power supply and system by drawing air 
in through various openings in the system and blowing it out the back. However, the 
fan also draws dust and other particles into the system, causing contaminant buildup, 
which results in an increase in the system’s internal temperature and interferes with 
the operation of various system components.        
To avoid these conditions, Dell recommends keeping your work environment clean to 
reduce the amount of dust and dirt around the system, thereby reducing the amount 
of contaminants drawn into the system by the power supply fan. In particular, you 
should keep the exterior of your system and monitor clean, and you should use a 
commercially available diskette-drive head-cleaning kit to remove contaminants inside 
your diskette drives.