IBM 9QS ユーザーズマニュアル
Type 9306 Model 900/910
53
Refer to installation instructions in this document if you have a 9306 Model 900 Rack
and are installing a new perforated front door.
and are installing a new perforated front door.
Note:
The illustrations in this documentation might be slightly different from your
hardware.
hardware.
Installing the new door on a model 900 rack
cabinet
cabinet
Use the following steps to remove your existing front door and install the new
perforated door:
perforated door:
1.
Refer to the rack documentation for information on removing side panels; then,
remove the left side panel on the rack and set it aside.
remove the left side panel on the rack and set it aside.
2.
If the front door is locked, unlock it; then, open the front door.
3.
While supporting the door, remove all four hinge pins that hold the front door in
place; then, store the door in a safe place for possible future use.
place; then, store the door in a safe place for possible future use.
Note:
Save three of the hinge pins for later installation.
s
4.
Remove the screw and nut that holds the hinge bracket
c1d in place; then, move
the hinge bracket three mounting spaces downward and reinstall it at the new
center location.
center location.
Locked
Unlocked