DELL X8300-6059 ユーザーズマニュアル

Drives

2 Check the documentation that shipped with the hard drive to verify that it 

is configured for your computer.

3 Slide the secondary hard drive into the hard drive cage.
4 Align the screw holes on the secondary hard drive with the screw holes on 

the hard drive cage.

5 Replace the four screws that secure the secondary hard drive to the hard 

drive cage.

1 Follow the instructions in "Before You Begin" on page 13.
2 Align the screw holes on the hard drive cage with the screw holes on the 

chassis.

3 Replace the three screws that secure the hard drive cage to the chassis.
4 If applicable, connect the power and data cables to the secondary hard 

drive (see "System Board Components" on page 10).

1 Follow the instructions in "Before You Begin" on page 13.
2 Check the documentation that shipped with the drive to verify that it is 

configured for your computer.

3 Slide the primary hard drive into the hard drive cage.
4 Align the screw holes on the primary hard drive with the screw holes on the 

chassis.

5 Replace the four screws that secure the primary hard drive to the chassis.
6 Connect the power and data cables to the primary hard drive (see "System 

7 Replace the computer cover (see "Replacing the Computer Cover" on 

8 Connect your computer and devices to electrical outlets, and then turn 

them on.

9 See the documentation that shipped with the hard drive for instructions 

on installing any software required for drive operation.

book.book  Page 49  Wednesday, April 25, 2012  12:34 PM