DELL X8300-6059 ユーザーズマニュアル
Bluetooth Assembly
69
12
Bluetooth Assembly
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
WARNING:
To guard against electrical shock, always unplug your computer from
the electrical outlet before removing the cover.
WARNING:
Do not operate your computer with any cover(s) (including computer
covers, bezels, filler brackets, front-panel inserts, etc.) removed.
CAUTION:
Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.
your warranty.
Removing the Bluetooth Assembly
1 Follow the instructions in "Before You Begin" on page 13.
2 Remove the computer cover (see "Removing the Computer Cover" on
2 Remove the computer cover (see "Removing the Computer Cover" on
3 Remove the front bezel (see "Removing the Front Bezel" on page 27).
4 Disconnect the Bluetooth assembly cable from the system board
4 Disconnect the Bluetooth assembly cable from the system board
connector F_USB4 (see "System Board Components" on page 10).
5 Press in on the tab as shown in the illustration and pull the Bluetooth
assembly away from the front panel.
6 Carefully slide and remove the Bluetooth assembly cable through the slot
in the front panel.
book.book Page 69 Wednesday, April 25, 2012 12:34 PM