DELL X8300-6059 ユーザーズマニュアル
Power Button Module
73
13
Power Button Module
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
WARNING:
To guard against electrical shock, always unplug your computer from
the electrical outlet before removing the cover.
WARNING:
Do not operate your computer with any cover(s) (including computer
covers, bezels, filler brackets, front-panel inserts, etc.) removed.
CAUTION:
Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.
your warranty.
Removing the Power Button Module
1 Follow the instructions in "Before You Begin" on page 13.
2 Remove the computer cover (see "Removing the Computer Cover" on
2 Remove the computer cover (see "Removing the Computer Cover" on
3 Remove the front bezel (see "Removing the Front Bezel" on page 27).
4 Remove the optical drive (see "Removing the Optical Drive" on page 50).
5 Remove the top cover (see "Removing the Top Cover" on page 57).
6 Disconnect the power button module cable from the system board
4 Remove the optical drive (see "Removing the Optical Drive" on page 50).
5 Remove the top cover (see "Removing the Top Cover" on page 57).
6 Disconnect the power button module cable from the system board
connector, F_PANEL (see "System Board Components" on page 10).
7 Press the power button module tabs and lift the power button module to
release it from the top panel.
book.book Page 73 Wednesday, April 25, 2012 12:34 PM