DELL X8300-6059 ユーザーズマニュアル
Fans
81
Replacing the Processor Fan and Heat-Sink Assembly
1 Follow the instructions in "Before You Begin" on page 13
2 Clean the thermal grease from the bottom of the heat-sink.
2 Clean the thermal grease from the bottom of the heat-sink.
CAUTION:
Ensure that you apply new thermal grease. New thermal grease is
critical for ensuring adequate thermal bonding, which is a requirement for optimal
processor operation.
processor operation.
3 Apply new thermal grease to the top of the processor.
4 Place the processor fan and heat-sink assembly over the processor.
5 Align the four captive screws on the processor fan and heat-sink assembly
4 Place the processor fan and heat-sink assembly over the processor.
5 Align the four captive screws on the processor fan and heat-sink assembly
with the screw holes on the system board.
6 Tighten the four captive screws that secure the processor fan and heat-sink
assembly to the system board.
NOTE:
Ensure that the processor fan and heat-sink assembly is correctly seated
and secure.
7 Connect the processor fan cable to the system board connector, CPU_FAN
8 Replace the computer cover (see "Replacing the Computer Cover" on
9 Connect your computer and devices to electrical outlets, and turn them
on.
book.book Page 81 Wednesday, April 25, 2012 12:34 PM