DELL X8300-6059 ユーザーズマニュアル
System Board
97
18
System Board
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
WARNING:
To guard against electrical shock, always unplug your computer from
the electrical outlet before removing the cover.
WARNING:
Do not operate your computer with any cover(s) (including computer
covers, bezels, filler brackets, front-panel inserts, etc.) removed.
CAUTION:
Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.
your warranty.
Removing the System Board
1 Follow the instructions in "Before You Begin" on page 13.
2 Remove the computer cover (see "Removing the Computer Cover" on
2 Remove the computer cover (see "Removing the Computer Cover" on
3 Remove the Mini-Card, if applicable (see "Removing the Mini-Card" on
4 Remove any PCI Express cards, if applicable (see "Removing PCI Express
5 Remove the processor fan and heat-sink assembly (see "Removing the
6 Remove the processor (see "Removing the Processor" on page 83).
7 Remove the memory modules (see "Removing the Memory Module(s)" on
7 Remove the memory modules (see "Removing the Memory Module(s)" on
page 21) and record which memory module is removed from each DIMM
slot so that the memory modules can be installed in the same slot after the
system board is replaced.
book.book Page 97 Wednesday, April 25, 2012 12:34 PM