DELL 8132 ユーザーズマニュアル
1072
IP Routing Commands
Default Configuration
This command has no default configuration.
Metric Type
The metric type to advertise for redistributed routes of this
type.
Redist Source
The type of routes OSPF is redistributing.
Metric
The metric to advertise for redistributed routes of this type.
Metric Type
The metric type to advertise for redistributed routes of this
type.
Subnets
Whether OSPF redistributes subnets of classful addresses, or
only classful prefixes.
Dist List
A distribute list used to filter routes of this type. Only routes
that pass the distribute list are redistributed.
Number of Active
Areas
The number of OSPF areas with at least one interface running
on this router. Also broken down by area type.
ABR Status
The number of OSPF areas with at least one interface running
on this router. Also broken down by area type.
ASBR Status
Whether the router is an autonomous system boundary router.
The router is an ASBR if it is redistributing any routes or
originating a default route.
RIP Section
RIP Admin Mode
RIP Admin Mode
Whether RIP is globally enabled.
Split Horizon Mode Whether RIP advertises routes on the interface where they were
received.
Default Metric
The metric assigned to redistributed routes.
Default Route
Advertise
Whether this router is originating a default route.
Distance
The administrative distance for RIP routes.
Interface
The interfaces where RIP is enabled and the version sent and
accepted on each interface.
Parameter
Description
2CSPC4.X8100-SWUM102.book Page 1072 Friday, March 15, 2013 8:56 AM