DELL 8132 ユーザーズマニュアル

IPv6 Routing Commands

This command has no user guidelines.

The following example configures an IPv6 address and enables IPv6 

processing.

console(config)#interface vlan 15

console(config-if-vlan15)#ipv6 address 2020:1::1/64

Use the ipv6 enable command in Interface Configuration mode to enable 

IPv6 routing on an interface (including tunnel and loopback interfaces) that 

has not been configured with an explicit IPv6 address. Command execution 

automatically configures the interface with a link-local address. The 

command is not required if an IPv6 global address is configured on the 

interface.

Disabled is the default configuration.

Interface Configuration (VLAN, Tunnel, Loopback) mode.

This command has no user guidelines.

The following example enables IPv6 routing, which has not been configured 

with an explicit IPv6 address.

2CSPC4.X8100-SWUM102.book  Page 1091  Friday, March 15, 2013  8:56 AM