DELL 8132 ユーザーズマニュアル

IPv6 Routing Commands

1800 is the default value for 

seconds.

Interface Configuration (VLAN, Tunnel, Loopback) mode

This command has no user guidelines.

The following example sets at 1000 seconds the value that is placed in the 

Router Lifetime field of the router advertisements.

console(config)#interface vlan 15

console(config-if-vlan15)#ipv6 nd ra-lifetime 1000

Use the ipv6 nd reachable-time command in Interface Configuration mode 

to set the router advertisement time to consider a neighbor reachable after 

neighbor discovery confirmation. 

ipv6 nd reachable-time milli

seconds

•

milliseconds — Reachable-time duration. A value of zero means the time 

is unspecified by the router. (Range: 0-3600000 milliseconds)

The default value for neighbor discovery reachable times is 0 milliseconds.

Interface Configuration (VLAN, Tunnel, Loopback) mode

2CSPC4.X8100-SWUM102.book  Page 1106  Friday, March 15, 2013  8:56 AM